Skip to main content

Modular DC · Public sites and fleets

Utopia Slim 160

Starvo Utopia Slim 160 is a modular DC EV charger with 160 kW of total power for public charging sites, commercial properties and fleet depots. It provides two CCS2 charging connectors, each rated at 250 A.

Product features

Key features of Utopia Slim 160

Two 80 kW modules in one PMU

One PMU contains two 80 kW power modules with air cooling. Its 160 kW total rated power is shared between two connectors according to the power allocation settings and the vehicles’ charging capabilities.

10.1-inch display and connectivity

A 10.1-inch colour display shows charging information. The charger supports 4G and Wi-Fi connectivity, ISO 15118-2 and OCPP 1.6J protocols, and remote OTA updates.

Power-Linked: three chargers, six connectors

Three Utopia Slim 160 chargers can be connected in a Power-Linked configuration, with 480 kW of combined rated capacity and six CCS2 connectors. Power is shared automatically according to charging demand; 480 kW is the combined capacity of all three chargers.

STARVO UTOPIA

Take a closer look at Utopia

See the charger’s details from different angles.

Utopia Slim 160 — Side

Product views show the red unit. Use the body colour selector to preview other colours.

Modular System

Two 80 kW power modules in one air-cooled PMU provide 160 kW of total rated power per charger.

1 PMU · 2 × 80 kW

Illustration of the interior of Utopia Slim 160, showing the power module units
Illustration of the modular layout based on the brochure; component positions vary by configuration.

Individual components can be serviced and replaced following the charger’s maintenance procedures.

Power Module Unit (PMU)

A Power Module Unit (PMU) houses the power modules. Their number and capacity depend on the selected model configuration.

Power Module Unit (PMU)

Power-Linked

480 kW from 3 × 160 kW

Three Utopia Slim 160 chargers provide 480 kW of combined rated power and six CCS2 connectors. Power is allocated according to charging demand.

Charger 1160 kW · 2 × CCS2
Charger 2160 kW · 2 × CCS2
Charger 3160 kW · 2 × CCS2
Combined rated power480 kW6 × CCS2

The combined capacity is the total rating of three chargers. Power delivered to each vehicle depends on its charging capability, power allocation and installation conditions.

Illustrative Power-Linked configuration. Electrical connections and system settings are defined during project design.

Optional

IP65 Power Module

An IP65 protection option is available for the Power Module Unit (PMU), subject to project configuration.

The IP65 rating shown here applies to the PMU. The charger cabinet has its own protection rating, listed in the model specifications.

Starvo will confirm the PMU options suitable for the model and configuration you order.

Planning your installation

Plan charger positions, foundations and the electrical supply with the project’s technical team. Electrical installation and commissioning follow the selected model, Power-Linked configuration and project design.

Dimensions, clearances and electrical connections follow the model’s installation guidance and the project design. Product diagrams explain the system; installation details are established during technical planning.

Discuss installation requirements

Starvo Utopia: Flexible configuration, straightforward maintenance

Every charging site has different requirements. The available electrical supply, vehicles, space and expansion plans all influence the choice of charger. Starvo Utopia Series uses a modular design to make configuration and ongoing maintenance more straightforward.

Separate units with clear roles

Utopia is built around an AC input unit (ACU), power module unit (PMU), DC output unit (DCU) and display unit (DSU). Each has a defined role, from receiving and converting electrical power to managing the output to the vehicle and showing information to the driver.

Utopia Slim 160 has one PMU housing two 80 kW power modules. Its total rated power of 160 kW is shared between two CCS2 connectors according to charging demand and vehicle capability.

Service at component level

When servicing is needed, technicians can focus inspection and replacement on the components that require attention. Spare parts can be planned around the units installed in the charger. All work is carried out by qualified technicians following the maintenance procedures.

Module voltage, current, temperature and status information help technical teams investigate faults. Depending on the system configuration, remote diagnostics and over-the-air software updates also support monitoring and maintenance.

Configured for your site

Configuration starts with project planning. The model, power rating, cable management system and supporting features are selected to suit the site. Body colour options can align Utopia with your business identity, subject to order quantity requirements.

As charging demand grows, further development is planned around the equipment in use and the capacity of the electrical installation. Starvo can help identify a suitable configuration for those plans.

Materials and protection

Every Starvo Utopia Series charger uses a 304 stainless steel cabinet with an IP55 protection rating. The material provides corrosion resistance, an important consideration in Indonesia’s humid environment. Appropriate positioning, ventilation and installation also help maintain the charger’s performance.

The Utopia Slim 160 cabinet is designed for outdoor use in accordance with the installation requirements. Site conditions, ventilation and service access should be considered during planning.

An IP65 power module unit option is available where additional component protection is needed, depending on the model and configuration. This rating applies to the PMU; the charger cabinet has its own protection specification.

Discuss your site requirements with Starvo to choose the Utopia model, configuration and finish that suit your project.

Technical information

Product specifications

Review capacity, connectors and technical requirements before ordering. Starvo can help check that the equipment suits your vehicles and installation conditions.

Total rated system power
160 kW
Connectors / channels
2 × CCS2
Connector rated current
250 A
Configuration
2 × 80 kW modules in one PMU
Design
Modular
Cabinet protection
IP55
Cabinet material
304 stainless steel
Communication protocol
ISO 15118-2 / OCPP 1.6J
Connectivity
4G / Wi-Fi

Power delivered to the vehicle

160 kW is the total rated power of one charger. Each connector is rated at 250 A. Actual power and current depend on power allocation, vehicle capability and installation conditions. 480 kW is the combined rated capacity of three chargers in a Power-Linked configuration.

Contact us for product information and availability.

Applications

Where this product can be used

Public and commercial charging

For operators and site owners requiring two CCS2 charging points per charger. Choose the number of units according to vehicle types, typical parking times and the site’s electrical supply.

Company fleet depots

For vehicles charging when they return to base. Plan the number of chargers and any Power-Linked configuration around energy demand, available charging time and departure schedules.

Before requesting a quote

What we need to know

Vehicle and site information helps us recommend equipment and assess installation requirements.

01 · Vehicles

Vehicle types and quantities

Share vehicle models, connector types, estimated daily energy demand, parking time and how many vehicles need to charge at once.

02 · Installation

Site and electrical capacity

Send the project address, available electrical capacity and photos of the parking area. Include the planned charger positions and vehicle access routes.

03 · Procurement

Schedule and service requirements

Tell us the quantity, planned start date and installation needs. Technical support, maintenance, spare parts and warranty are defined in the quotation.

Frequently asked questions

Buying Utopia Slim 160

Can Power-Linked deliver 480 kW to one vehicle?

No. 480 kW is the combined rated capacity of three Utopia Slim 160 chargers, each rated at 160 kW, with six CCS2 connectors in total. Power is allocated automatically according to demand. The power delivered during each charging session depends on vehicle capability, system settings and installation conditions.

How do I request a quote for Utopia Slim 160?

Tell us the quantity you need and where the chargers will be installed. We will explain configuration choices, availability and delivery lead times.

What affects charging time?

Charging time depends on energy needed, vehicle charging capability, battery condition and charge level, power allocation and electrical installation. Share the vehicle models and operating schedule so Starvo can help assess demand.

What after-sales services are provided?

Technical support, maintenance, spare parts and warranty are provided as set out in the agreed quotation. Scope and terms depend on the product and project location.

Does Starvo serve projects outside Indonesia?

Starvo supplies charging equipment and supports projects in Indonesia, the Philippines and Europe. Projects elsewhere can also be discussed. We review equipment, local requirements, shipping, installation and support for each project, based on its location and scope.

Which charging connectors does Utopia use?

The Utopia configurations shown have two CCS2 connectors per charger. A Power-Linked configuration with three chargers of the same model provides six CCS2 connectors.

Does the IP65 option cover the whole charger?

The IP65 option described here protects the Power Module Unit, or PMU. The charger cabinet has a separate protection rating. PMU compatibility is confirmed for the model and configuration you order.

Related products

Compare other models

Compare connector count, total power and power sharing to find the right equipment.

Starvo Utopia Power 250

250 kW · 2 × CCS2

Utopia Power 250

Starvo Utopia Power 250 delivers 250 kW of total DC charging power for public charging sites, commercial properties and fleet depots. The charger has a modular design and two CCS2 connectors, each rated at 400 A.

View product
Starvo ChargePro 160

160 kW · 2 × CCS2

ChargePro 160

ChargePro 160 is a DC charger with 160 kW total power and two CCS2 connectors for public charging sites, commercial properties and fleet depots. It includes a modular power distribution unit and an HD display.

View product

Contact Starvo

Request a quote for Utopia Slim 160

Contact us for product information and availability. Share the project location, quantity, vehicle types and installation needs so we can prepare a suitable quotation.

Request a quote

WhatsApp · 0815-666-8618